AI on the CCTV you already have.
Most plants in India already record every shift. Almost nobody watches the recordings until after an incident. PredCo watches them while the shift is still running.
AI video analytics for factories is software that watches existing CCTV feeds and flags unsafe events as they happen: a worker without a helmet, a person in a forklift lane, smoke near a line, a blocked exit. PredCo runs it on the cameras already in your plant, inside your network, and alerts a supervisor in under a second.
Five jobs your cameras can do on every shift.
Each runs on the same camera feed and the same edge unit. Start with one zone and one problem, then add the rest.
Four steps, on hardware you already own.
- 1
Use the cameras you have
Any RTSP or ONVIF feed becomes a sensor. No replacement cameras and no new cabling.
- 2
Detect at the edge
A GPU unit inside the plant runs the models. Footage stays on site and faces are blurred before frames leave the GPU.
- 3
Alert whoever can act
Zone-specific alerts reach the supervisor on Teams, SMS, email or your EHS system in under a second.
- 4
Fix the pattern, not the event
A daily summary by zone and shift shows where and when unsafe acts repeat, so supervisors fix the cause before it turns into an injury.
PredCo watches and alerts people. It does not stop machines and it is not a safety-rated system, so it never replaces guarding, interlocks or your safety procedures. It makes sure the people responsible see what the cameras see.
Free 7-day CCTV safety snapshot
We connect PredCo to two to four of your existing cameras for seven days and send you a written report of what they saw: PPE misses, people in forklift lanes and restricted zones, smoke, and blocked exits, with timestamps and clips. Footage stays inside your plant.
- Pick 2–4 cameras. The zones you worry about most. Any RTSP or ONVIF camera works, including Hikvision, CP Plus, Dahua, Axis and Bosch.
- We connect on site. Inference runs on an edge unit inside your network. No footage leaves the plant, and faces are blurred before anything is stored.
- Seven days of detection. Every shift, including nights and weekends, because that is where supervision is thinnest.
- A written report. Events by zone, shift and type, with clips. Yours to keep, whatever you decide next.
- Manufacturing plants, warehouses and construction sites in India
- At least a few working CCTV cameras over the production or yard area
- Someone from EHS, operations or the plant team to point us at the right cameras
Questions plant teams ask.
Bring one problem. We'll show you the deployment.
A 30-minute working session with our engineering team. No slideware. Bring a real operational problem and leave with a concrete view of what a PredCo deployment looks like for your plant.