One view of safety across every site and every contractor.
On a construction project, responsibility is spread across the developer, the main contractor, subcontractors and consultants. When something goes wrong, the first question is who saw what. The site cameras did.
Construction site safety monitoring uses AI on site cameras to detect missing helmets, vests and harnesses, people in exclusion zones under cranes and near heavy equipment, and intrusions after hours, and sends alerts and evidence to the site safety team. PredCo runs on the site's existing CCTV and keeps an event record per contractor, per zone and per day.
What it detects on your floor.
Configured per zone and per shift, on the cameras already pointed at the area.
PPE across contractors
Helmet, vest and harness compliance across every crew on site.
Work at height
Harness use on scaffolds, slabs edges and roof work.
Crane and equipment exclusion zones
People under loads and inside the swing radius of excavators and cranes.
Site perimeter and gates
Intrusion and unauthorised entry outside working hours.
Fire and smoke
Visible smoke and flame in material stores and hot-work areas.
Evidence by contractor
Events grouped by zone and work area, so each contractor's record is clear.
- Real estate and commercial projects
- Industrial and plant construction
- Infrastructure and road projects
- Data centre builds
Four steps, on hardware you already own.
- 1
Use the cameras you have
Any RTSP or ONVIF feed becomes a sensor. No replacement cameras and no new cabling.
- 2
Detect at the edge
A GPU unit inside the plant runs the models. Footage stays on site and faces are blurred before frames leave the GPU.
- 3
Alert whoever can act
Zone-specific alerts reach the supervisor on Teams, SMS, email or your EHS system in under a second.
- 4
Fix the pattern, not the event
A daily summary by zone and shift shows where and when unsafe acts repeat, so supervisors fix the cause before it turns into an injury.
PredCo watches and alerts people. It does not stop machines and it is not a safety-rated system, so it never replaces guarding, interlocks or your safety procedures. It makes sure the people responsible see what the cameras see.
Free 7-day CCTV safety snapshot
We connect PredCo to two to four of your existing cameras for seven days and send you a written report of what they saw: PPE misses, people in forklift lanes and restricted zones, smoke, and blocked exits, with timestamps and clips. Footage stays inside your plant.
- Pick 2–4 cameras. The zones you worry about most. Any RTSP or ONVIF camera works, including Hikvision, CP Plus, Dahua, Axis and Bosch.
- We connect on site. Inference runs on an edge unit inside your network. No footage leaves the plant, and faces are blurred before anything is stored.
- Seven days of detection. Every shift, including nights and weekends, because that is where supervision is thinnest.
- A written report. Events by zone, shift and type, with clips. Yours to keep, whatever you decide next.
- Manufacturing plants, warehouses and construction sites in India
- At least a few working CCTV cameras over the production or yard area
- Someone from EHS, operations or the plant team to point us at the right cameras
Other jobs for the same cameras
Questions plant teams ask.
Bring one problem. We'll show you the deployment.
A 30-minute working session with our engineering team. No slideware. Bring a real operational problem and leave with a concrete view of what a PredCo deployment looks like for your plant.