Construction & Infrastructure

See every site the way the safety head wishes he could.

Q: Is this a safety system? Will it stop a crane or a truck?

No. PredCo detects and alerts; it is not safety-rated and never replaces permits, guarding, banksmen or your procedures. It makes sure the site engineer and the HSE head see what the cameras see, while it is still happening.

Q: Does site footage go to the cloud?

Not unless you want it to. Detection runs on an edge unit in the site office, faces are blurred before frames are stored, and the deployment can be cloud, hybrid or on-prem. Only events and clips leave the site, and only to the people you name.

Q: How does it handle subcontractor workers who change every week?

Detection is on behaviour and equipment, not on identity: a missing helmet is a missing helmet whoever is wearing it. Events can be tagged by zone and shift, and by the subcontractor working that zone, so the weekly review has numbers per contractor without tracking individuals.

Q: Can it read the tenders we bid on?

Yes. Tender automation reads the notices from the portals you follow, checks eligibility against your credentials, drafts the compliance matrix and flags the clauses that disqualify. The bid team prices; the software reads.

Q: What does a first site cost and how long does it take?

A first site is live in four to six weeks on two to four existing cameras. PredCo is licensed software; there is no hardware to buy beyond a compact edge unit. We scope it with your HSE head on a call and send a written proposal within one working day.

A construction company runs dozens of live sites with cameras already on them, a batching and crushing fleet that stops without warning, and a bid team that reads tenders by hand. PredCo turns those cameras into continuous safety and progress evidence, watches the equipment that holds a schedule hostage, and reads the tenders so the team bids on the right ones.

25+ plant deployments
SOC 2 and ISO 27001
Cloud, hybrid or on-prem

Scope a first deployment Request demo

AudienceEPC · Infrastructure · Developers · RMC & precast

FunctionsSafety · Plant & equipment · Bids · Compliance

Active programsServing manufacturers and project owners in India

First site live4 to 6 weeks

Replace with real photography for this page

In short

AI for construction works on the cameras and equipment a contractor already has. Site CCTV becomes continuous safety monitoring: missing helmets and harnesses, people under suspended loads, trucks in pedestrian areas, blocked egress, with alerts to the site engineer in under a second. Sensors on batching plants, crushers and DG sets predict failures before a pour is lost. The same platform reads tenders, drafts the compliance matrix and keeps BOCW and ESG evidence in one place.

PredCo is an industrial AI company headquartered in New Delhi. For construction and infrastructure companies it runs computer vision on the CCTV already on site to detect missing PPE, people in exclusion zones and vehicle-pedestrian conflicts, monitors batching plants, crushers and generators for failures, and automates tender reading and compliance evidence. Deployed cloud, hybrid or on-prem.

01 / Industry challenges

Four problems every project head carries from site to site.

Sites are temporary, spread across states, staffed by subcontractors, and judged on one thing: the schedule. The tools that work in a factory have to work here without a control room.

One safety officer, forty acres, three shifts

Working at height, excavations, cranes and reversing trucks all at once. Supervision runs on walk-rounds and goodwill, and the near-miss nobody saw is the fatality next month.

The batching plant stops, the pour stops

A mixer gearbox, a crusher bearing or a DG set failing mid-pour costs a day of schedule and a concrete truck queue. Maintenance is reactive because nobody is measuring the equipment.

The bid team reads everything and bids on too little

Tender portals publish hundreds of notices a week. Engineers spend their best hours on eligibility checks and compliance matrices instead of pricing the jobs worth winning.

Evidence lives in WhatsApp groups

BOCW registers, toolbox-talk records, PPE issue logs, dust and noise readings and client safety audits arrive as photos and PDFs. Reassembling them for an audit or a claim takes weeks.

02 / Who it is for

Who owns this on your side, and what each of them gets

Head of HSE / Safety head

Gets: Every site visible from one screen; near-misses counted, not remembered; audit evidence that builds itself.

Stops worrying about: Being the name on the incident report for a site he could not be at.

Project director / Plant & machinery head

Gets: Equipment failures predicted before a pour is lost; utilisation of cranes, mixers and trucks by site.

Stops worrying about: A schedule slip that lands on him because a gearbox nobody was watching gave out.

Head of bids / Business development

Gets: Every relevant tender read on the day it is published, eligibility and compliance checked, the team pricing only the ones worth winning.

Stops worrying about: Missing a qualifying tender, or losing one on a clerical disqualification.

03 / PredCo for Construction & Infrastructure

The solutions most adopted in this sector

Construction customers usually start with site safety on the cameras they already have, then add equipment monitoring and tender automation as the second and third projects.

Safety & Productivity Monitoring

PPE, exclusion zones, vehicle-pedestrian conflicts, blocked egress and headcount on existing site CCTV; alerts to the site engineer in under a second.

See how it works

Asset Reliability

Vibration, thermal and current signatures on batching plants, crushers, conveyors, compressors and DG sets, so failures are planned, not suffered.

See how it works

Tender Automation

Reads every notice from the portals you bid on, checks eligibility, drafts the compliance matrix and flags the clauses that disqualify.

See how it works

Compliance Workflow Automation

BOCW registers, toolbox talks, PPE issue, dust and noise logs and client audits assembled continuously, with the evidence attached.

See how it works

Energy Management

DG set, batching plant and camp-load energy by site, so diesel and power are allocated to the right project and the right cost code.

See how it works

Engineering Schematics

GA drawings, P&IDs and single-line diagrams for industrial and plant construction digitised into searchable, linked data.

See how it works

04 / The first six weeks

How a first deployment runs

Small, measured against your own numbers, and live before the quarter ends. Nothing is promised that the first site cannot show.

Stage 01 of 04

Week 1: site survey on your cameras

We pick two to four existing cameras per site: the gate, the crane radius, the batching plant, the excavation edge. No new hardware; the camera has to see the zone, nothing else.

05 / Deployment snapshot

What a first site produces in six weeks

A first deployment is deliberately small: a handful of cameras on one live site, chosen with the HSE head, measured against the site's own incident and near-miss log. Nothing is promised that the cameras cannot see.

PPE and exclusion-zone events per gate and per shift, from the cameras already on site
Vehicle-pedestrian conflicts at the crane radius and the truck loop, with the clip attached
Blocked egress and material left in front of fire points, flagged while it is still there
Headcount in a zone during a drill or an incident, by subcontractor
An evidence trail the client's safety auditor can open, not a WhatsApp thread

Deployments are described without naming the operator. We are under confidentiality with every customer on this page.

CCTV frame with PPE detections in a loading yard

06 / Regulations & standards

Coverage out of the box

PredCo maintains validation libraries against the standards and rulebooks that apply to your sector.

BOCW Act 1996 and Central Rules 1998National Building Code of India 2016, Part 7Factories Act 1948 (plants and yards)IS 3696 scaffolding and laddersC&D Waste Management Rules 2016CPCB dust and noise normsISO 45001ISO 14001ISO 50001BRSR (SEBI)OSHA 29 CFR 1926 (US)Client HSE standards (IFC, EPC owners)

07 / Questions

Questions construction and infrastructure teams ask.

Our sites already have CCTV from the security contractor. Can PredCo use those cameras?

Yes. PredCo works on standard RTSP or ONVIF streams from the cameras already on site, whatever the brand. What matters is that the camera sees the zone: a camera on the gate, the crane radius or the batching plant works; a camera pointed along a hoarding does not. Part of the first week is moving one or two cameras, not buying new ones.

Is this a safety system? Will it stop a crane or a truck?

Does site footage go to the cloud?

How does it handle subcontractor workers who change every week?

Can it read the tenders we bid on?

What does a first site cost and how long does it take?

08 / Adjacent sectors

Teams in adjacent industries also use PredCo

Talk to our team

Scope a first deployment in construction & infrastructure.

Tell us one site or plant and what you want to see first.
A PredCo engineer replies within one working day.
We walk through how the first six weeks would run, on your own cameras, equipment or documents.

See every site the way the safety head wishes he could.

Four problems every project head carries from site to site.

Who owns this on your side, and what each of them gets

The solutions most adopted in this sector

How a first deployment runs

Week 1: site survey on your cameras

Coverage out of the box

Questions construction and infrastructure teams ask.

Teams in adjacent industries also use PredCo

Scope a first deployment in construction & infrastructure.

Tell us about one live site.